After NAB last year, Autodesk released Smoke 2015 – their Mac-based editing application. This version also marked Autodesk’s shift from perpetual licenses to a subscription model for Smoke. Any new Smoke users must subscribe for an active license, with monthly, quarterly, and annual plans available. In order to attract new users, Autodesk also introduced a free student license, which is active for three years. This is part of a companywide initiative to make all Autodesk software available to students worldwide.
I wrote an in-depth review of Smoke 2013 two years ago. This was the first major optimization (after the introduction of Smoke 2011 for the Mac) to convert Smoke from the look and feel of its Irix and Linux roots into a predominantly Mac-oriented application. Much of Smoke 2015’s interface and operational style remains unchanged from that previous version. In the intervening two years, Autodesk has decided that Smoke and Flame no longer need to remain 100% compatible or locked into the same development cycle. Each product has evolved from a core toolset, but more and more is being designed for a specific audience and user need. Smoke 2015 is targeted at editors who want a strong compositor, but are most comfortable with track-based NLEs that run on Macs. This new release is even more Mac-friendly with improved performance on Mac hardware, including the new Mac Pros, iMacs and Retina MacBook Pros.
The hallmark of working with visual effects inside Smoke is the integration of a node-base compositing tool. That can also be the most daunting part of the learning curve for new users. Building on the 2013 version, Smoke 2015 has increased the amount of effects control that you can perform in the timeline, without touching any nodes. It uses a “ribbon” of common effects that can be applied to a clip and adjusted without ever leaving the timeline display. These consist of 14 effects modules that include most of the text, transform/DVE, color correction, and speed change effects commonly used by editors. For instance, you can apply a color correction to a clip or an adjustment layer, and then alter the look by numerical entry (keypad or mouse slider). You get a lot of correction control right within this ribbon, including access to master/highlight/mids/shadows and RGB/red/green/blue parameters. If you want more control with color wheels, then simply enter the effect editor to switch to that layout for the selected clip.
Smoke had included a third-party effects API (Sparks), but other than GenArts, never had many takers among the development community interested in rewriting their Sparks Linux plug-ins (originally developed for Flame and Smoke on Linux) into Mac versions for Smoke on the Mac. Not many users bought the ones that were available. As a result, Autodesk has moved away from this API for Smoke, even though the effects tab is still there. Instead, Autodesk engineers filled in the gaps through additional effects that now come with Smoke. The bottom line is that although there’s a Sparks tab in the ribbon, it’s a legacy item with no functionality without third-party plug-ins.
Smoke has undergone a big performance improvement since its original Mac introduction. In the past, you could usually only play a timeline clip in real-time, when the clip had no more than a single effect applied to it. Add more effects and rendering was needed. Now it’s possible to apply several effects to a clip and still play through it without rendering. This is based on my testing on a 2009 8-core Mac Pro with 28GB of RAM and an ATI 5870 GPU card. To enable new users to adapt more quickly to complex composites and to add effects not supplied by third parties, Smoke 2015 includes a number of presets. For example, if you add a lens flare, there’s a wide range of preset styles accessible from a pulldown menu. When you set up a chromakey, you can start with a preset selection of nodes, designed to be a good starting point. Autodesk also added 3D camera tracking into Smoke 2015, which had been previously developed for Flame.
In an effort to position Smoke as a finishing tool that works well with Apple Final Cut Pro X, Autodesk has improved the compatibility with FCPXML lists generated from that application. While this works reasonably well, I did have problems relinking to clips with frame rates that differed from the main sequence rate. For example, 60fps clips from a Canon 5D that were cut into a 23.98fps timeline and slowed, did not properly relink when I imported the sequence into Smoke.
Overall, Smoke 2015 is a good upgrade. With a subscription you get updates as they come out. Unfortunately, this process is not as easy as it is with Apple, Adobe, or even Avid products. My software went from SP1 (service pack) to SP2. When I tried to download SP2, I could only find SP3. I tried this version, but it was incompatible, because that was designed for legacy perpetual license owners. I finally got SP2 installed, but only through the help of tech support. On the plus side, I’ve found Autodesk’s support personnel to be very helpful and knowledgeable, when I’ve needed them.
Smoke does not support dual-display systems in the same way as its competitors. You can run the broadcast monitoring signal to a second display, which gives you full-screen video or a duplicate of the node tree in some modes; but, the user interface is not configurable across two screens like other NLEs. Smoke also accesses media differently than other NLEs, which conflicts with some of the Mac’s internal networking functions. I typically run with my internal Mac OS X firewall set to block all connections. This works fine with all creative applications, except Smoke. Set that way, all of the media is unlinked. Rather than reconfigure my settings to run Smoke (since my main use is for demo purposes), I simply turn off the internal firewall before launching Smoke.
The long-term success of the subscription software business model among creative applications is still an unknown. Adobe and Autodesk are primarily on the vanguard – with Avid offering it only as one option. Among users, it’s still a love/hate thing. It will take a few years yet to see whether or not it’s the right move. Nevertheless, if you have the business to justify the cost and want to stay current with a top-notch editor/compositor, then a Smoke subscription might be right for you. If you are serious about Smoke 2015, then I would highly recommend Alexis Van Hurkman’s book, “Autodesk Smoke Essentials”, which may be purchased through the Autodesk website, as well as from Amazon.com. It’s the ideal quick start guide for users committed to learning Smoke.
©2015 Oliver Peters